Choose your OS and follow the steps to configure your windows to use TOPVPN.
First, open the System Preferences by going to the Apple menu and choosing System Preferences. Or choose System Preferences from the Dock. And click on the Network system preference.
In the Network system preference there is a list of network connections on the left side. Click the + icon in left bottom corner to make a new connection for the TopVPN.
In the next window click on the Interface popup menu to see the list of choices and select VPN from the list
From VPN Type dropdown manu choose the L2TP over IPSec protocol.
Next, set the Service Name to TopVPN and click Create (see below).
If you've set the VPN up before, you may see configurations in the list. Be sure to click Add Configuration... from the Configuration dropdown menu to add a TopVPN configuration.
TIP: You can use this option to add more locations just by changing the Server Address
( check out step 13 )
In the next window, enter TopVPN for the configuration name. Then click Create.
In Server Address enter one of our server address. Check out Network
In Account Name enter your TopVPN USERNAME
Select the checkbox to show the VPN status in your menu bar
Click on Authentication Settings ...
In this window tick the Password field and enter your TopVPN account password. Then add our preshared secret key: "mytopvpn" ( whitout quotes ) and click OK
Next, we'll need to adjust some of the advanced VPN settings. To do that, first click the Advanced... button. See the screen below for its location.
For the VPN to work effectively, the Send all traffic over VPN connection checkbox should be marked. Make sure the checkbox is checked. Click the DNS tab from the advanced settings menu.
Click on the + in the bottom left corner and add the folowing DNS servers 184.108.40.206 and 220.127.116.11 this will bypass any DNS blockades from your ISP. After adding them click OK
If you like to add multiple locations you will need to create new configuration and do the same steps from step 6. All you need to change is just the Server Addres. You can add any of the host addresses listed in our Network
Once you're done with everything just Apply all the settings and then click Connect
When you establish successuful connection with our servers, all your network traffic will be routed trough our VPN service and green status bars will go up and down as you make some network traffic.
Also you can easly connect, disconect or switch between our VPN locations from the menu bar on your MacOS.
WindowsRecomended PPTP L2TP/IPsec OpenVPN™
AndroidRecomended PPTP L2TP/IPSec OpenVPN™
LinuxRecomended PPTP L2TP/IPSec OpenVPN™